Type VII Lock Down Model

Lock Down Model KO

The LKM10K Push Pull Handle Model meets Type VII Criteria of the FF-L-2890C Federal Specification

Type VII – Push Pull Lock Down Model (NEW)
Type VIII – Panic Bar Lock Down Model (In Development)

The LockOne™ Lock Series Lock Down Model is designed for use on secondary entry/exit doors using an access control system to regulate the flow of traffic into rooms without impeding egress.  It can be mechanically disabled with the turn of a knob.  This action denies entrance into the area, but single motion egress is always available.

Series:  LKM10K

Model:  Handle

GSA Type:  VII

Strike: # 1 Flush Inswing Door Single or Double Door Regular Bevel

Strike: #2  Outswing Door Single Door Reverse Bevel

Strike: #3  Inswing Door Surface Mount Single or Double Door Regular Bevel
Strike: #9  Inactive Door Double Door Reverse Bevel
Type VII – Pedestrian Door Pre-Assembled Lock (PDPL); compatiable with stand-alone or integrated building access control

 

    • Utilizes electronic access control
    • ADA compliant
    • Single motion egress
    • Non-handed
    • 90 minute fire rating

 

 

Compliance & Certifications
    • FF-L-2890C Approved
    • GSA Approved
    • U.L. Fire Rated
    • NFPA 80 & 101 Life Safety

Security Features

Dead Bolt – The FF-L-2890C specification requires a locking device equipped with dead bolt and trigger mechanism that operates when the combination lock is in the locked position. The dead bolt automatically extends into the locked position when the trigger mechanism engages the strike.

Encapsulated Strike – The LKM10K Models come with a strike that surrounds the dead bolt for reinforced security. As specified four strikes are available for inswing, outswing & pairs of doors.

Access Control Device Compatibility – The LockOne™ Lock Series is an electrified lock and is compatible with a variety of electronic access control devices (12v or 24v DC – 1 amp).

Monitoring “Alarm” Switches – Device Dead Bolt, Combination Lock & Request to Exit (REX) – Standard in all LKM10K Models, but use is optional. When connected you have the ability to monitor the bolt position on both the LKM10K Lock and combination lock. REX can be used to monitor bolt position or shunt the door alarm. The lock is able to determine between an entry and an exit.

 

Benefits

Interchangeable – You can install the LockOne™ Lock Series in your facility to maintain a consistent look as the appearance of the exterior trim has not changed.

Retrofittable – Simply remove an existing LKM7000 Model and attach our retrofit fixture, modify a few existing holes then install either the Type I, II, III, IV, or VI models (sold separately).

Field Tested – With thousands of LKM10Ks in use today, the improvements made will exceed your expectations.

Ease of Operation – The internal linear bearing allows for easy entry and exit even with heavy loads applied to the door.